The project feasibility report mainly investigates, studies and compares the main contents and supporting conditions of the project, such as market demand, resource supply, construction scale, process route, equipment selection, environmental impact, fund raising, profitability, etc., from the aspects of technology, economy and engineering, and makes a comparison of the possible financial, economic and social benefits after the completion of the project. It provides a comprehensive analysis method for project decision-making by predicting whether the project is worth investing and advising on how to carry out construction. Feasibility study has the characteristics of predictability, impartiality, reliability and scientificity.
The project feasibility report is a kind of written material put forward in the early stage of formulating production, capital construction and scientific research plans, through comprehensive investigation and research, analyzing and demonstrating the feasibility of a construction or transformation project, a scientific research and a commercial activity. Mainly used to elaborate the feasibility and necessity of the project at all levels. It plays a very important role in project approval, obtaining financial support, clarifying the project direction, and planning anti-risk strategies.
The feasibility report of a project is a written report written before the formulation of a construction or scientific research project, which carries out specific, in-depth, detailed technical demonstration and economic evaluation of the possibility, effectiveness, technical scheme and technical policy of the project implementation, in order to determine a technically reasonable and economically cost-effective optimal plan and the best opportunity.
The main content of the project feasibility report is to use comprehensive and systematic analysis as the main method, economic benefit as the core, around the various factors affecting the project, using a large number of data to demonstrate the feasibility of the proposed project. A comprehensive analysis and evaluation of the whole feasibility study is put forward, and the advantages and disadvantages and suggestions are pointed out. In order to meet the need of conclusion, it is often necessary to add some accessories, such as test data, demonstration materials, calculation charts, drawings and so on, in order to enhance the persuasion of the feasibility study report.
On this basis, it demonstrates the necessity of project construction, financial profitability, economic rationality, technological advancement and adaptability, and the possibility and feasibility of construction conditions, so as to provide a scientific basis for investment decision-making.
Most of the feasibility studies belong to the scope of Engineering consultation. At present, the qualifications of domestic engineering consultation from high to low are Grade A, Grade B and Grade C respectively.
Feasibility study is of great significance to the whole project construction process and even to the whole national economy. In order to ensure the scientificity, objectivity and impartiality of feasibility study, and effectively prevent errors and omissions, in feasibility study,
I. First of all, we must conduct investigation and research from an objective and impartial standpoint and do a good job in collecting basic data. For the basic data collected, it is necessary to demonstrate and evaluate according to the objective reality, to reflect the objective economic law truthfully, and to draw a conclusion whether the project is feasible through scientific analysis based on objective data.
II. The depth of the content of the feasibility study report must meet the standards stipulated by the state, and the basic content should be complete. It should possess as much data as possible, avoid rough fabrication and practise formalism.
In practice, we should grasp the following four points:
(1) Argumentation, then decision-making;
(2) Deal with the relationship among the three stages of project proposal, feasibility study and evaluation, and stop the research when it finds that it is not feasible.
(3) We should carry out the investigation and research all the time. We must grasp the practical and reliable data to ensure the comprehensiveness, importance, objectivity and continuity of data selection.
(4) Comparing various schemes, selecting the best one. For foreign-related projects, or projects that must be in line with foreign countries under the pressure of external factors such as WTO accession, the content and depth of feasibility study should also be in line with international standards as far as possible.
III. In order to ensure the quality of the feasibility study, the consulting and designing units should have enough work cycle to prevent irresponsible and hasty actions for various reasons.
At the same time, the technical scheme is an important part of feasibility study. The main research projects should adopt the production method, technology and process flow, important equipment and its corresponding general layout, the main workshop composition and building type and other technical solutions. On this basis, the civil engineering quantity and other engineering quantity are estimated. In this part, in addition to the text description, some important data and indicators should be listed and illustrated, and the general layout and process diagram should be drawn.
Luoyang Building Material and Architectural Design and Research Institute is a professional building material and building double-grade design research institute. It has more than 20 years’experience in mineral material research. According to the needs of customers, our institute can provide a series of services such as feasibility study report, design, general package, production improvement, intelligent transformation, etc. It can provide customers with solutions tailored to local conditions, scientific and reasonable production line technology. It can not only meet the output requirement of process design, but also save resources, save energy and protect environment. It can also greatly reduce the failure rate of equipment, reduce the loss of equipment and the replacement frequency of spare parts, and realize the continuous growth of economic benefits.