Kiln head section
The kiln head is the discharge part of the rotary kiln, the diameter is larger than the diameter of the rotary kiln, and the seal is realized by the stainless steel fish scales and the kiln body. The main components are the inspection port, the coal nozzle, the trolley, and the observation hole.
It is the main body of a rotary kiln (Retorting rotary kiln), usually 30 to 150 meters long, cylindrical, with 3 to 5 rolling rings in the middle. The cylinders are mostly processed by the factory into 3~10 sections, which are welded by large trucks to the destination and welded. The rolling ring part is also commonly known as (the tire ring) cast from molten steel, and the kiln part of the rolling ring is slightly thicker than other parts of the kiln steel plate due to the bearing capacity. The supporting tug, which is also part of the kiln body and the rolling ring, is connected to the foundation and is the load-bearing pillar of the entire rotary kiln. Usually a set of rollers consisting of two rollers and two retaining wheels. The rotary kiln should be covered with refractory bricks during normal operation.
The kiln tail part is also an important part of the retorting rotary kiln. The shape of the feed end is similar to that of a rotary kiln, which mainly undertakes feeding and sealing.
Rotary kiln support
1. The support frame of the retorting rotary kiln can make our rotary kiln equipment more sturdy, so that it will not shake when working, and stable production.
2. The support frame of the rotary kiln is mainly to fix our rotary kiln equipment, which can prevent the deformation of our rotary kiln equipment when it is used. Everyone knows that the rotary kiln equipment will be shaped if it is improperly operated, so it has such a role.
3. The rotary kiln bracket can facilitate the lifting and hoisting of our rotary kiln equipment and facilitate transportation.